Fwd: [RACES] TOWER for sale: Must be picked up SOON.

[Iain McFadyen]

FYI...




FOR SALE
On the ground - ready for pick-up!

40ft Aluminum Tower (ALUMNA - we are pretty sure), with CD45 rotor installed
The correct size of the tower is:
2 sections = 10' L x 13" C/C
1 section = 10'L x 13" C/C - to 10" C/C to mate with top section and the 2
bottom sections
1 section = 10'L x 10" C/C (top section)
Also the top section has a rotator plate mounted in it as well as the
rotator, and the very top end has a (inside diameter of) 1 5/8"D x 10"L
tube welded to the top legs to accept the mast into the rotator.

$400.

I also have left a couple of 10ft sections of 1/4", 3/4", 7/8", & 1" Aluminum
tubing, good for building VHF/UHF antennas.


Due to being physically challanged, without help, I can't SHLEP these items
to a HAMFEST, nor ship, nor do I have pictures, therefore must be local
pick-up.

I am open to negotiation just as long as it is CASH - no trades.

The tower MUST find a new home ON or BEFORE April 23, 2005 or it will come
to a tragic end - cut up and delivered the aluminum scrap dealer.

73's

Howard W3CQH
240-793-6736 Please leave a message if I don't answer.
I am in Kensington, Montgomery County, Maryland
NEDROG at AOL.COM

[Non-text portions of this message have been removed]


		
---------------------------------
Do you Yahoo!?
 Make Yahoo! your home page   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://amrad.org/pipermail/tacos/attachments/20050417/351b8b0f/attachment.htm